Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Richmond?
Spring replacement in Richmond typically runs $180 – $340 for one spring, installed. That’s the estimated range most Richmond homeowners fall into, and it covers the spring itself plus the labor to lift the door weight off safely and reset the system. A matched pair is usually replaced together, so expect roughly double that range for a pair. The written estimate we hand you before any work starts sets the final price.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work stacks up against the other repairs we handle most often in Richmond. These are typical estimated ranges; the exact figure depends on your door, the spring type, and what we find once we inspect the hardware.
| Job | Typical Estimated Range |
|---|---|
| Spring repair or replacement (one spring) | $180 – $340 |
| Spring pair, replaced together | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement | $250 – $500 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Full garage door repair (general) | $150 – $600 |
| New door installation | $700 – $2,200 |
What pushes a spring job toward the top of that range? The type of spring matters. Standard torsion springs (the horizontal coil above the door) and extension springs (the stretched springs along the sides) don’t cost the same to replace, and a torsion job takes more setup. A heavy door, a two-car door, or an old door with worn drums and cables can all add labor. If the spring broke and the door dropped, we also check the cables, rollers, and bottom brackets, because a sudden drop can bend a track or snap a cable at the same time. A simple one-spring swap on a well-kept single door tends to land near the bottom of the range.
What Affects Spring Replacement Pricing in Richmond
Richmond isn’t a single kind of housing stock. The city runs from older bungalows and small homes in neighborhoods like Iron Triangle and Santa Fe to larger houses out toward Point Richmond and the Richmond Annex. That mix changes what we find behind the door.
- Door weight and size. A heavy double door needs a beefier spring than a single-car door, and the spring, not the door, is what sets the price.
- Spring type. Torsion springs and extension springs are priced and serviced differently. We match the spring to the door’s rating rather than swapping in whatever fits.
- Age of the hardware. On an older door, worn drums, cables, and hinges often show up during the same visit. We tell you what’s worn and what can wait.
- Condition after the break. A spring that let go while the door was up can leave a bent track or a frayed cable. The full inspection catches that before we finish.
- Brand of door. We work on Clopay, Amarr, Wayne Dalton, and Raynor doors, among others, and know the hardware each one uses. If your door has a brand-specific bracket or spring plate, we plan for it up front.
- Opener condition. A tired opener strains a new spring. If the opener is a LiftMaster, Chamberlain, Genie, or Craftsman unit, we can check it during the same visit and quote opener repair separately.
One thing stays constant: the written quote is the price. We don’t quote one number and bill another.
Safety First: Why Spring Work Isn’t a DIY Job
Garage door springs hold the full weight of the door under tension, and a torsion spring can release with enough force to cause serious injury. That’s why we treat spring replacement as trained-professional work, not a weekend project. We can explain how the spring system works and what to check, but we don’t walk anyone through releasing a spring on their own. If your door won’t lift or a spring looks broken, keep the door closed if you can and call us.
Should You Repair the Spring or Replace the Whole Door?
In most cases, replacing the spring is the right call, even on an older door. A new spring is a fraction of the cost of a new door, and a well-built door will outlast several spring sets. Where replacement starts to make sense is when the door panels are rotted or bent, the track is beyond realigning, or you want a different look or better insulation. Our door installation work runs $700 – $2,200 depending on size and style. We’ll tell you honestly which one your door needs.
How to Save on Spring Replacement
Spring cost is mostly the part and the labor, so the savings come from acting early and having the right info ready.
- Catch it before it breaks. A door that suddenly feels heavy, lifts unevenly, or makes a sharp popping sound is telling you the spring is near the end. A quick inspection is cheaper than an emergency swap.
- Replace both springs together. If your door has two springs and one breaks, the other is the same age and usually not far behind. Replacing the pair now saves a second visit and a second labor charge later.
- Know your door brand. Telling us it’s a Clopay, Amarr, Wayne Dalton, or Raynor door when you call lets us arrive with the right parts and avoids a return trip.
- Bundle a same-visit check. If your opener is acting up, ask about garage door opener repair during the same visit. One trip, one estimate.
- Get a free written estimate. The number on paper is the number we stand behind. Call (833) 519-3675 and we’ll give you a straight range before we come out.
Can You Fix My Spring the Same Day?
Often, yes. Spring replacement is one of the most common calls we get in Richmond, and we keep the popular springs on hand. Call (833) 519-3675. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is available when the schedule allows, and the visit starts with a free estimate so you know the price before we begin.
What Happens When You Call
You reach a real person, not a robot menu. We ask about your door, its brand, whether it’s a single or double, and what’s happening: won’t lift, lifts crooked, loud pop, door stuck up. That’s enough to give you a typical range on the phone and book a visit. When we arrive, we inspect the full spring system, the cables, and the tracks, then give you a written estimate. If it’s a straightforward spring, most jobs are done in one visit. We finish clean and test the door through a full cycle before we leave.
If you reach us outside dispatch hours, your call is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday.
Why Silverline for Spring Work in Richmond
Silverline is a garage door specialist, not a general handyman outfit. That focus shows up in how we diagnose. We’re factory-familiar with eight of the most widely installed brands in residential use: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. When you tell us your door’s brand, we know its spring plate, its bracket style, and the failure points that come up on that system. We’re not guessing at your equipment.
We’ve worked on garage doors since 2012. Opener repair is a specialty here, not a side service. And we handle the full lifecycle: repair, opener repair, and new installation, so if the day ever comes when a new door makes more sense than another repair, you won’t need to find a second contractor. Our installation work covers Clopay, Amarr, Wayne Dalton, and Raynor doors across a wide range of home styles.
If you’re also weighing other repairs, our garage door repair page covers the full spread, and our cable repair page explains what a snapped cable looks like. For the broader picture of what we do in the city, see Richmond.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Richmond?
Typically $180 – $340 for one spring, installed. A matched pair is usually replaced together, so a pair costs about twice that range. The written estimate confirms the final price. Call (833) 519-3675 for a free estimate.
Is it cheaper to repair or replace a garage door spring?
Repairing the spring is almost always cheaper than replacing the door. A single spring swap runs $180 – $340, while a new door installation runs $700 – $2,200. Replacing the door only makes sense when the panels or frame are badly damaged. Call (833) 519-3675 and we’ll tell you which one fits.
Why do both springs usually get replaced together?
Because both springs on a two-spring door are the same age and wear at the same rate. When one breaks, the other is typically close behind, and replacing the pair in one visit saves a second labor charge. A pair costs about twice the single-spring range of $180 – $340. Call (833) 519-3675 to book an estimate.
How long does a spring replacement take?
Most single-spring jobs are done in one visit, and we test the door through a full cycle before we leave. A pair or a job with worn cables and rollers takes a bit longer, and we’ll tell you at the estimate. Call (833) 519-3675. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Can you come today?
Often, yes. Spring replacement is a common same-day call in Richmond, and same-day service is available when the schedule allows. Call (833) 519-3675 for a free estimate; we’ll give you a straight price before we start.
Get a Free Estimate on Your Spring Replacement
If your door is heavy, crooked, or making a popping sound, don’t wait for it to break. Call Silverline Garage Door Repair at (833) 519-3675 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. We’ll confirm the price in writing before any work begins, match the spring to your door, and leave it running the way it should.
Pricing reflects the Richmond market as of 2026. Silverline Garage Door Repair offers free estimates – call (833) 519-3675. Written by the team at Silverline Garage Door Repair, serving Richmond since 2012.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Renee Walsh"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Javier Castillo"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Grace Yang